How To Make Antibacterial Soap

Luxembourgguidelines.orgHow To Make Antibacterial Soap. With so many activities, of course, most people don’t maintain personal hygiene. This makes various diseases attack the body easily and causes the immune condition to decrease. For this reason, everyone needs extra protection in maintaining personal hygiene and bodily health. One way to do this is to use antibacterial soap. The existence of this soap is believed to be able to kill germs, parasites, fungi and bacteria that stick to the body. This can happen anytime and anywhere during daily activities. Starting from shaking hands with other people, using the toilet, touching dirty objects, holding doorknobs, and not washing your hands after eating. So, how do you make this soap? Come on, see the explanation in the article below.

Gambar by

How To Make Antibacterial Soap

The following is how to make this soap, including:

1. Prepare Tools And Materials

First, you can prepare a good quality liquid soap base. Then, try not to contain harsh chemicals or use natural ingredients. Starting from coconut oil and olive oil. Apart from that, add essential oils as desired as natural aromatherapy. Starting from lavender, tea tree, peppermint, or citrus. Next, you can use clean and contamination-free water. Don’t forget to prepare a large, heat-resistant container A stirrer or heat-resistant wooden spatula to mix the ingredients evenly. Lastly, use a thermometer to monitor the temperature of the mixture within a safe range.

2. Determine The Amount Of Ingredients

Second, determine the amount of ingredients used. Then, the dosage depends on how much soap is made. Usually, approximately 250 ml of basic liquid soap and prepare 10-20 drops of essential oil into the mixture. Apart from that, adding color (operational) with the number of drops can be adjusted to the needs and water usage of around 250 ml or more.

Gambar by

3. Heating Liquid Soap Base

Third, warm up the liquid base soap using a heat-resistant container that is large enough. Then, use medium heat to heat the soap and produce the desired texture. After that, the stirring process is carried out regularly and touches all parts of the container. Use the stirring technique well and measure the temperature of the liquid soap base using a thermometer. The aim is to help avoid overheating and damaging the quality of the soap. Next, pay attention to the color and consistency of the soap during heating. To be aware of unwanted changes, and make sure the texture of the soap is liquid without lumps.

4. Add Essential Oils

Fourth, add essential oils to the mixture to provide aroma to the soap. Then, the dose is around 10 to 20 drops for liquid hand washing soap in small quantities. However, it depends desired needs.

5. Mixing Oil and Soap

Fourth, mix the essential oil and coir which have been previously heated. Then, make sure the essential oil you use is safe for your skin. When adding essential oils to the soap mixture, you must be careful. The goal is to produce a consistent aroma.

6. Wait Until It Thickens

Sixth, wait for the mixture to become thick after the stirring process is complete. This is done to ensure the soap reaches the right consistency when used. Then, prepare bottle for storing liquid hand washing soap. Make sure the bottles you use are clean, dry and match the required capacity. After that, pour the liquid hand washing soap into the storage bottle. Be careful to avoid spills and close tightly to prevent contamination or keep the soap clean.

Gambar by

That is the interesting explanation above that can be conveyed regarding how to make antibacterial soap. Then, hopefully after reading the discussion in this article, you can understand it well, use it as an additional reference, increase your knowledge and insight. And in the future it can be useful and can apply this knowledge in everyday life.