Luxembourgguidelines.org – How To Make A Rubber Band Ball. Rubber bands are pieces of rubber in the shape of bracelets that are made to tie things together. Apart from that, rubber bands come in various sizes, both large and small and thick or thin. Then, the raw material for making it uses natural rubber so it is yellow in color. Meanwhile, colorful rubber bands are produced by adding dyes. In fact, there are those who make oil-resistant and weather-resistant rubber bands. Most rubber bands are also made from natural rubber and processed products taken from rubber trees. Meanwhile, other rubber bands are made from synthetic rubber. But its existence is not popular than elastic natural rubber. Apart from being used to tie various items, rubber bands are also used as material for making balls. So, how is it made? Come on, see the explanation in the article below.
How To Make A Rubber Band Ball
The following are several ways you can make balls from rubber bands, including:
# Step 1
- First, you can start with small objects. Starting from marbles or golf balls. Then, choose short, thick rubber bands. So, fold the rubber in half. Continue, two more times, and a third time if necessary. For this step, don’t twist it because you will end up with a flat pile of rubber.
- Second, while pinching the thick rubber band flat, you can loop the thinner rubber band around it. Then, you can play the slack part of the thin rubber and wrap it over the thick one in the other direction. Then, twist and wrap until there is no longer any thin rubber that is not strong.
- Third, wrap the rubber band around the ball. This method is done with two rubber bands that are placed crosswise over the core. Then, make sure everything is installed firmly. Then, you can twist and wrap it around the core repeatedly. This can be started with the smallest rubber because it will not be used after the ball passes a certain size.
# Step 2
- Fourth, can add more rubber bands until the ball is smooth. Then, wrap the rubber band until it forms a ball. After that, place the rubber bands evenly. This is done so that no one side of the ball is bigger than the other side. Interestingly, balls without anything in the middle will appear lumpy and smooth when they reach the size of a golf ball.
- Lastly, you can do this by testing the ball. This method can be done by throwing it into the air, or bouncing it against a wall. The rubber band ball will have a lot of spring. You can also add more rubber bands keeping an eye on the results.
That is the interesting explanation above that can be conveyed regarding how to make a rubber band ball. Hopefully after reading the discussion in this article, you can understand it well, use it as an additional reference, increase your knowledge and insight. And in the future it can be useful and can apply this knowledge in everyday life.