Luxembourgguidelines.org – How To Connect XLR Mic To PC. External Line Return or better known as XLR is a type of microphone that sends audio signals using a cable. Then, these cables are used for stage lighting, professional audio equipment, recording studios, and so on. Additionally, XLR cables have three pins that provide high-quality audio transmission. Furthermore, the sound from the microphone is very high quality, clear and free of interference with a low signal-to-noise ratio. This makes many people use XLR microphones for streaming and other work. Then, how do you connect the microphone to a computer device? Come on, see the explanation in the article below.
How To Connect XLR Mic To PC
The advantage of XLR microphones is access to more high-resolution audio. This is due to higher sampling and bit depth. Then, the microphone also reaches a sampling speed of 92KHz. Speed in sampling is important to get the number of sound samples recorded every second. The following are the steps for connecting the microphone to PC devices, including:
1. Using An XLR-To-USB Signal Adapter
First, you can use an XLR to USB signal adapter. Then, connect the female port to the male port on the XLR-USB signal adapter. After that, Connect the USB side to one of the ports on the PC device. Then, you can open your computer’s sound settings and see the new microphone input. Next, enable the XLR input and microphone and check the XLR-to-USB adapter. These adapters are usually sold cheaply and are widely available in offline and online markets.
2. Using An Audio Interface Or Mixer
Second, you can use a professional audio interface that supports 48+Volt phantom power, connecting a condenser, and a dynamic microphone. Then, this method is done by installing the software on the computer that is provided in the audio interface box or downloading it via the official audio interface website. Besides that, Connect one end of the USB cable provided to the USB audio interface to the USB port on the PC device. After that, connect the condenser microphone to the XLR port on the USB audio interface. Then, activate the ghost power button and record via microphone settings.
3. Using the XLR to 1/8″ TS Microphone Cable Converter
Third, you can use an XLR to 1/8″ TS microphone cable converter. Then, you have to connect the XLR female microphone with the XLR male connector. After that, connect the TS connector side to the microphone input on the PC device. So, Open sound settings on PC and enable microphone input option. Next, your microphone is connected to the PC device you are using. Speed in sampling is important to get the number of sound samples recorded every second.
That is the interesting explanation above that can be conveyed regarding how to connect an XLR mic to a PC. Hopefully after reading the discussion in this article, you can understand it well, use it as an additional reference, increase your knowledge and insight. And in the future it can be useful and can apply this knowledge in everyday life.